Synchronise Road Data with Traffic Phases
The unique RoadPod® PhaseT incorporates sensors connected to traffic lights or/and boom gate systems. The synchronisation between these signals and the roadside unit enables a clear representation of road activity during each phase and helps identify safety risks associated with insufficient time limits or/and traffic violations.
Individual vehicle transgressions
Driver behavior at phase change
Vehicle queuing & phase capacity
A Clear Picture of Signalised Traffic
The RoadPod® PhaseT is a mobile traffic classifier, storing every axle that passes over its pneumatic tubes. Then, its additional optical fibre interface allows an accurate detection and recording of changing signal phases in parallel with traffic data.
To analyse driver behaviour at signalised crossings, it is necessary to define the signal timing sequences. Since traffic light systems and level crossing systems vary greatly across the world, this counter offers different templates to choose from or allows to set up a customised Phase Map in the MTE™ software. In this case, each phase is specified (e.g. descending boom, red flash alert) and their length of time are defined in seconds.
RoadPod® PhaseT Hardware
- Sensor type:
- Pneumatic tube (traffic)
- Optical fibre (signals)
- Time resolution: Better than 1ms
- Memory: Up to 1 million axles
- Internal battery: 4 D alkaline cells
Road Case and Main Unit
- Stainless steel case: 350 x 124 x 95mm
- PVC main unit: 243 x 107 x 82mm
- Total weight: ~ 4.15kg
- Running temperature: -10°C to 60°C
- Running humidity: 0 to 95%